The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel.
The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The bandsaw has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely.
The same setup is then repeated beneath the table. The cast iron table tilts from 0 degree to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in.
For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways.When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.
Guiding on toothed strips with a millimetre scale makes it possible to precisely set upper band guiding. T-square of the band saw with a lock on the eccentric and equipment for parallel cutting. Made up of cast iron, precise table of ground and polished surface.
Bilateral band guiding greatly improves its durability. Mains powered LED work Light. Quick action lock on rip fence.
Blade Length: 1,790mm(70.5in). Blade Width: 6-13mm(0.24-0.51in).
Worktable Size: 300x300mm(11.8x11.8in). LPA Sound Pressure Level: 92.7 dB(A).
LWA Sound Power Level: 102.3 dB(A). Package Size: 89x45x35cm(35x17.7x13.8in). Other Accessories as Shown in the Picture. Our company is an emerging professional Cross-Border Electronic company.
So far we have finished the assets re-organization and obtained wholesale financing. We guarantee every product is of high quality and durable utility compared to other factories becayse we choose the best-buys goods. We are really appreciated if you would like to give us your valuable positive comment(s) after you receive our products, which is a huge encouragement for us to make our products and service better and better. Hope you will love our items.
Any questions will be answered promptly, so please feel free to let me know your concern. At present, our company has warehouses in. NO tariffs within EU countries.
According to the different location, transport time will range from 2 to 7 workdays. Please do check everything carefully when receiving the package.Failure to do so might result in damage to your own rights and interests. The item "10'' 220V Professional Woodworking Bandsaw Cast Table Solid Fence stand Blade" is in sale since Monday, November 23, 2020. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Saws\Band Saws". The seller is "chinayoungenjoy" and is located in Prague. This item can be shipped worldwide.